SB Acoustics SB15NBAC30-4 Vented cast aluminum chassis for optimum strength and low... more
Product information "SB Acoustics SB15NBAC30-4"
SB Acoustics SB15NBAC30-4
- Vented cast aluminum chassis for optimum strength and low compression
- Geometrically reinforced aluminum cone for optimum piston operation and reduced break-up
- Soft low damping rubber surround for improved transient response
- Non-conducting fibre glass voice coil former for minimum damping
- Extended copper sleeve on pole piece for low inductance and low distortion
- CCAW voice coil for reduced moving mass
- Long life silver lead wires
- Vented pole piece for reduced compression
Specifications
- power handling (continuous/programme) = 50 W
- resonance frequency fs = 33 Hz
- impedance R = 4 Ohm
- sound pressure level SPL = 88 dB (2,83V; 1m)
- DC resistance Re = 3.1 Ohm
- force factor BL = 4.7 N/A
- voice coil inductance L = 0,12 mH
- effective piston radiating area Sd = 82 cm2
- effective mechanical mass incl. air load mms = 10.6 g
- equivalent volume of compliance Vas = 21 l
- total Q factor Qts = 0.29 (Qms=4.4, Qes=0.31)
- voice coil diameter = 30,5 mm
- mounting diameter d = 123.9 mm
- overall diameter d = 150 mm
- mounting depth (not countersunk) t = 68.3 mm
Related links to "SB Acoustics SB15NBAC30-4"
Available downloads:
Read, write and discuss reviews... more
Customer evaluation for "SB Acoustics SB15NBAC30-4"
Write an evaluation
Evaluations will be activated after verification.
Hint!
Viewed